17
OPERATION OF THE FULL SIZE POWER NOZZLE
Carpet Height Adjustment Tips:
When using the power nozzle, start on the
“Auto” setting. If pushing the power nozzle
feels difficult, then adjust to a higher setting.
If the power nozzle feels very easy to push,
you may want to lower the power nozzle for
more effective cleaning. The “Auto” setting
is the recommended setting for hard floor
surfaces (i.e. tile, vinyl, wood).
Warning Light
Your power nozzle is equipped with a circuit
breaker safety system that protects it from a
jammed situation. Items that cause jammed
brushrolls include socks, excessive threads
and corners of area rugs. The warning
indicator light on top of the unit will change
from green to red should this condition occur
(Fig. 1).
If the circuit breaker trips:
• Turn off the vacuum cleaner and power
nozzle then unplug the power cord.
• Remove the object preventing the brushroll
from turning.
• Locate the circuit breaker switch on the
back of the power nozzle and press it to
reset the breaker (Fig. 2). When the unit is
turned back on, the warning light should be
green.
If the breaker trips again, repeat these steps
again to correct the problem. If this does not
correct the problem, contact an Authorized
Riccar Retailer for further assistance.
Fig. 1
Fig. 2
