13
MAINTENANCE AND CARE OF THE TANDEM AIR POWER NOZZLE
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:C
PART NUMBER
SHEET 8 OF 8
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
0.250
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET
8 OF 8
X.X .5 mm RADII X.X .5mm
X.XX .25mm X.XX .25mm
X.XXX .12mm MACHINE SURFACE
X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX
0 30" COMMON TO BE CONCETRIC TO .05mm
BY
ECN NO
DATE
REV
SCALE 0.400
SCALE 0.400
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:C
PART NUMBER
SHEET 8 OF 8
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
0.250
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET
8 OF 8
X.X .5 mm RADII X.X .5mm
X.XX .25mm X.XX .25mm
X.XXX .12mm MACHINE SURFACE
X.XXXX .012mm BREAK SHARP CORNERS TO .25mm MAX
0 30" COMMON TO BE CONCETRIC TO .05mm
BY
ECN NO
DATE
REV
SCALE 0.400
SCALE 0.400
Fig. 1
Fig. 2
Edge Cleaning
The edge cleaning feature provides improved
cleaning near walls and stationary furniture. For
maximum edge cleaning, place the left side of the
nozzle, from the user’s perspective, against the wall.
Automatic Carpet Height Adjustment
Your vacuum is designed with an automatic self-
adjusting nozzle. No manual adjustments are
required. The height of the nozzle automatically
adjusts to the flooring surface. This self-adjusting
feature allows the nozzle to float evenly over all
flooring surfaces.
Replacing the Vacuum Belt
WARNING!
To Reduce the Risk of Electrical Shock
or Injury from Moving Parts, Turn the Vacuum Off
and Unplug it.
NOTE:
To ensure maximum cleaning efficiency, the
belt should be checked regularly to be sure it is in
good condition. Check to see if the belt is stretched,
cracked, or if excessive slipping is occurring.
Replace if needed.
• Turn the vacuum off and unplug it before changing
the belt.
• Remove the bottom plate (
see Removing and
Reinstalling the Bottom Plate
, page 14).
• Remove the brushroll and the worn or broken
belt from the brushroll pulley and the motor drive
shaft (Fig. 1).
• Loop the new belt around the motor drive shaft
and the brushroll.
• Reinstall the brushroll into the nozzle. Turn
the brushroll by hand, making sure the belt
is not twisted and all rotating parts move
smoothly (Fig. 2).
• Reinstall the bottom plate (
see Removing and
Reinstalling the Bottom Plate
, page 14).
