3.2- Safety warnings regarding the use
Important notice! Observe any national safety regulations regarding tool installation, operation and
maintenance.
1. Become familiar with the controls and the proper use of the tool.
2. The use of this product by children is forbidden.
3. Only well-instructed adults should operate the product. This product is not intended for use by
persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of
the product by a person responsible for their safety.
4. Use only ploughing tines with a permissible speed at least as high as the no-load speed of the tool.
5. Do not use tool if it is damaged, eccentric or vibrating.
6. Do not use tool if the tines are damaged, cracked, eccentric or vibrating.
7. Never seize or touch the ploughing tines during operation.
8. Position power cable in a way that it is not trodden on or damaged during use.
During operation, always keep the cable away from ploughing track.
9. If the power cable is damaged, it must be replaced by the manufacturer, its after sales service or a
person with similar qualification in order to avoid any danger.
If the power cable or extension cord is damaged or cut during operation, immediately disconnect plug
from its main power source. Do not touch the cable or extension cord before unplugging from main
power.
10. Work may create projection of debris. Wear appropriate protective equipment (face mask, safety
goggles…).
11. Residual risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with the tool’s construction and design:
a. Damage to hearing if effective hearing protection is not worn.
b. Risk of injury if you touch the tines while in use
c. Exposure to electricity by using a defective cable.
d. Risk of body injury or property damage from flying debris.
e. WARNING! This machine produces an electromagnetic field during operation.
This field may under some circumstances interfere with active or passive medical implants.
To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult
their physician and the medical implant manufacturer before operating this machine.
f. WARNING! A certain level of noise emitted from this machine is not avoidable.
Plan noisy works according to local laws and at specific times.
Keep rest periods and if necessary restrict the working hours to a minimum.
For your own personal protection and the protection of bystanders have suitable hearing protection
worn.
12. Before you begin:
- The machine must be properly assembled before use.
- The machine should be carefully checked before each use. You should only work with a machine
that is in good condition. If you notice a fault on the machine that may cause danger to the operator or
the environment, do not operate the unit until the default has been repaired.
- For your safety, replace any worn or damaged part. Use only original parts. Parts not recommended
by the manufacturer may not fit on the machine and may cause injury.
- Browse the working area to remove all objects and foreign materials that may be thrown by the tines
or that may damage the tool.
- During operation identify hard objects or risk areas to avoid bumping into them and damaging the
tool.
- Work only in daylight or under sufficient artificial light.
13. Proper use:
