Page
17
/
29
4.5- Motion Detector Adjustment (for models WITH detector only)
Light duration adjustment
•
The "TIME" dial is used to adjust the light duration, from 10 ± 5 secs to 10 ± 1 mins, after
movement has been detected.
•
Turn the "TIME" dial to the "+" direction to increase the time of lighting.
•
Turn the "TIME" dial to the "-" direction to decrease the time of lighting.
Light level sensitivity adjustment
•
The "LUX" dial is used to adjust the sensor sensitivity.
•
Turn the "LUX" dial to sun symbol ( ) to allow the spotlight operating at any light level.
•
Turn the "LUX" dial to moon symbol ( ) to allow the spotlight operating at night only.
V. OPERATION
5.1- Intended use
This tool is intended for domestic use only. This is designed for indoor and outdoor lighting
purpose. Do not use for artisanal, commercial, professional and / or industrial applications.
VI. MAINTENANCE AND STORAGE
WARNING!
Before any intervention on product, ensure that power is set to the “OFF” position
and disconnect from main power source.
Reminder: In order to maintain the machine in good working condition, carry out regular
maintenance of the machine after each use and before storage. Any breach or inadequate
maintenance reduces the life of the machine and increases the risk of breakdowns and accidents.
6.1- Maintenance
•
Clean the product surface with a soft and clean cloth. Do not use detergent or aggressive
chemicals for cleaning.
•
Never immerse the machine in water or any liquids.
6.2- Storage
•
Clean the product before storage.
•
Keep product, instruction manual and accessories (if any) in the original packaging.
•
Store the product in a clean environment, where is not freezing or too hot (exceed 50 ̊C).
•
Keep out of reach of children (e.g. lock it up).
6.3- Disposal
•
Do not dispose with household garbage. Do not throw into the environment.
•
Dispose of the product in a collecte centre for waste of electrical and electronic equipment,
or a waste drop-off centre; or seek advice from your local municipality.
•
Proceed with disposal of the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
