RIB AA50130, Manual

Page: 33 / 80

33
TECHNICAL FEATURES
Ambidextrous irreversible gearmotor used to actuate booms up to 4 m / 157”
inches long.
The cabinet of the operator is treated with cataphoresis and thermal spray
coating. The barrier boom can be supplied as a single piece or, in the case
high objects may hinder its travel, you can require it in the articulated version,
specifying the height of this obstacle from the ground.
The barrier boom with RIB profile is constructed for being fitted with a safety
photocell strip.
N.B. You must make installation features comply with laws and standards in
force.
TECHNICAL DATA
RAPID S
Max. boom lenght m/in 4/157”
Opening time s 3
EEC Power supply 230V~ 50Hz 230V~ 60Hz
Motor capacity W 240 285
Power absorbed A 1 1,3
Capacitor µF 10
Max. torque Nm/ftlb 80/59 73/54
EEC Power supply 120V~ 60Hz
Motor capacity W 186
Power absorbed A 2
Capacitor µF 25
Max. torque Nm/ftlb 54/40
Normative cycles 230V n° ∞ - 3s/2s
Normative cycles 120V n° ∞ - 3s/2s
Daily operations suggested n° 1200
Service % 100
Guaranteed consecutive cycles n° 1200
Lubrification SHELL OMALA S2 G100
Weight of electroreducer kg 62
Working Temperature °C -10 ÷ +55
Protection IP IP 54
ASSEMBLING RAPID S
After you have cemented in the base plate where you want it, mount RAPID S using
the nuts provided and a no. 19 hexagonal wrench.
1
280/11,2”x300/12”
3000/118” - 4000/157”
1065/42”
1000/39”
Measurements
in mm/inch
1⃣ - RAPID S barrier
2⃣ - Photoelectric cells
3⃣ - Galvanized column for P.E. cells
4⃣ - Strip with Photoelectric cells
5⃣ - Magnetic loop
Parts to install according to BS EN 12453 standard
COMMAND TYPE
USE OF THE SHUTTER
Skilled persons
(out of public area*)
Skilled persons
(public area)
Not skilled persons
Hold-to-run operation
A B Not possible
Impulsive - in sight
(e.g. push-button)
C or E C or E C and D, or E
impulsive - out of sight (e.g. remote)
C or E C and D, or E C and D, or E
automatic
C and D, or E C and D, or E C and D, or E
* a typical example are those doors which do not have access to any public way
A: Hold-to-run operation made by push-button ex: code ACG2013
B: Hold-to-run operation made by key selector ex: code ACG1010
C: Adjustable power of the motor or photocells to respect impact forces as indicated in Annex A
D: Safety strips and/or other additional devices to reduce the probability of contact with the door.
E: Devices installed in such a way that a person can not be touched by the door.
G
B
SYSTEM LAY-OUT
2
1⃣
2⃣
2⃣
4⃣
2⃣
2⃣
2⃣
2⃣
3⃣
3⃣
3⃣
5⃣
3⃣
3⃣
3⃣