Maintenance and Cleaning of P2-E6
25
Intake Filter # FI-P201
The intake filter is designed to ensure the clean air into the compressor.
1. Lift the particle screen up by the bottom end then remove it.
2. Take out of the intake filter from the intake chamber.
3. Put a new intake filter into the chamber.
4. Install pre filters.
Pre and intake filters can be purchased from your provider.
Battery Care and Maintenance
The P2-E6 Lithium-Ion Battery requires special care to ensure proper
performance and long life. Use only P2-E6 batteries # BA-P201 with your
concentrator.
CAUTION
Keep liquids away from batteries. If batteries get wet, stop using immediately and dispose
of battery properly.
Battery Replacement
1.
Press down on the latch and slide the battery out.
2.
Insert the P2-E6 battery by sliding battery into place until the latch returns to the
upper position and it clicks into place.
