1
2020.02.06 Edition
Thank you for using RHYMEBUS RM6 series drive.
For proper operations and safety purposes, please read manual carefully .
Only the qualified personnel may proceed with the installation.
Visit RHYMEBUS website:
for complete operation manual.
Please pay attention to the safety precautions marked with “DANGER” or “CAUTION” in
complete manual before installation.
DANGER
User may cause the casualty or serious damages if user does not abide
by the instructions of the manual to execute the tasks.
CAUTION
User may cause injuries to the people or damage the equipment if user
does not abide by the instructions of the manual to execute the tasks.
Power So
u
rce
R,S
(L,N)
AC power source
input terminals
Single-phase; sinusoidal power source input terminals.
R,S,T
(L1,L2,L3)
Three-phase; sinusoidal power source input terminals.
○
＋
, N
○
－
DC power source
input terminals
External DC power source terminal.
※
Only 2007 ~ 2015, 4007 ~ 4020 models have the terminal.
Motor
U,V,W
(T1,T2,T3)
Drive outputs to
motor terminals
Output three-phase variable frequency and voltage to
motor.
Power
and B
raki
ng
P(+), N
○
－
Dynamic brake unit
terminal
The terminals can connect to dynamic braking
unit(option).
P
○
＋
, N
○
－
P, N
P, PR
External
brakingresistor
terminal
The terminals can connect to external brake resistor
(option).
P(+), PR
P
○
＋
, PR
P(+), P1
External reactor
terminal
The terminal can connect to DC reactor (DCL) for
improving power factor. The default setting is
connected by a jumper.
P
○
＋
, P1
G
rou
ndi
ng
PE(or G)
Grounding terminal
Ground the drive in compliance with the NEC standard
or local electrical code.
RM6 Series
Simple Version
Operation Manual
Terminals of Main Circuit
