Page 4
7. Remove both seat back supports and the bag attachment.
Driver side seat support shown.
Rear Seat Kit Installation
1. Install the new front seat back
support brackets where the original
brackets were installed. Mount using
(4) 3/8-16 x 1.5” Hex Head Bolts and
(4) 3/8” Flat Washers (Bag #1).
NOTE: The driver and passenger side
brackets are different.
2. Use a 3/8” drill bit to open up the (2) rear most
holes in the bagwell area. Drill completely
through the rivet and the frame.
3. Loosely fasten the vertical support brackets to
the bagwell area using (2) 10mm x 40 Hex
Head Bolts, (4) Flat Washers and (2) Nylock
Nuts (Bag #2).
