16. Align the recessed areas on the seat bottom cushion with the locking tabs on the
seat platform (yellow). Slide the seat bottom onto the platform until it locks into
place on the locking tabs.
17. Fasten the handle to the seat platform
using (2) 6mm x 20 Phillips Head
Countersunk Screws (Bag #5). Hand
tighten to lock the seat bottom into place.
18. If reinstalling the OE rear struts, install them to
the front seat back support frame (red arrows).
If installing struts for an extended top, install
them to the rear seat back support frame (black
arrows).
NOTE: RHOX 88” Tops require TOP-0108 rear
struts.
19. Reinstall top using Original Hardware (if
applicable).
This completes the installation of your
RHOX 300 Series Rear Seat Kit. Please enjoy safely!
Scan QR code or use the link below to
view the installation video.
https://vimeo.com/user39935056
Page 8
