33
Fuel system
capacity of fuel tank: 7L
Parts
Quantity
Interval (h)
10
50
100
250
500
1000
2000
Drain dirt out of collector of fuel
tank
1
★
Check the oil-water separator
1
★
Change the oil-water separator
1
★
Check the
fuel hose.
Leakage
--
★
★
Crack / twist / others
--
★
★
★
Maintenance interval under normal conditions
Recommended fuel:
Merely use the quality diesel (selection of fuel grade should be dependent on environmental temperature).
Fill up the fuel
1. Park machine on the flat ground.
2. Lower the bucket onto ground.
4. Idle engine at low speed for 5min.
5. Shut down engine Unplug the ignition key.
Caution:
fuel should be disposed carefully. Before filling of fuel, shut down engine. No smoking
before filling fuel or with fuel system working.
6. Pay attention to the fuel scale. Add the fuel if needed.
Important:
keep any dirt, dust, water or other foreign material from getting into fuel system!
7. While filling of fuel tank, make sure the fuel is not sprayed on machine and added properly.
8. Put the cap back on fuel filler to avoid any lost or damage.
Inspection of oil-water separator ---every 200h
Oil-water separator
①
is used to separate the water or sediment from fuel. Oil-water separator
①
has a float able
to rise up when water becomes full. When there is water or sediment in the collector of oil-water separator, please
drain oil-water separator
①
.
Important:
shorten the inspection interval of oil-water separator
①
if there is excessive water in the fuel!
Drain steps:
Caution: the drain plug is designed to be counter - thread type and should be turned with hands, instead of vise
and wrench for protection of threads.
Summary of Contents for XN08
