RHINO TW84, Operator'S Manual

Page: 106 / 154

OPERATION
TW84 03/07 Operation Section 4-14
© 2007 Alamo Group Inc.
OPERA
T
ION
5. Level the mower side to side by manipulating
one lower lift arm length. On most tractors, at
least one of the lift arms is designed to allow
for manipulation of its length. Shortening or
extending will allow for deck leveling from
side to side. .
6. Securely block up the mower at this height.
7. Remove the bolts securing the tailwheel
beam support brackets and allow the
tailwheel(s) to rest at ground level. Align
beam and positioning bracket holes with
closest set of holes in support brackets and
reinstall securing the beam(s) in position.
Tighten all bolts and nuts.
8. Extend the tractor’s top 3-point link so that
when lifting the mower, the front of the deck
will raise 2 to 2½" before the tail wheel(s)
leaves the ground. This will allow the mower
to follow the contour of uneven terrain.
Note: Install optional check chains when there is a
problem with the hydraulic 3-Point lift maintaining a
set height or when a constant preadjusted cut
height is required. See Check Chains in the
Assembly Section for this accessory.