RHINO RM1900 Series, Manual

Page: 28 / 111

Barcode Scanner Manual
26
(please read Appendix D)
Same Code Output Time Delay
To avoid the same bar code being outputed
multiple times in a short time in the Trigger
Mode, user can set the scan engine only to be
able to output the same bar code after the set
time period. Same Code Output Time Delay :
refuse to output the same barcode again within
the set time period after reading a barcode. Scan
engin can output only after the period has
expired. Set "No Output Time Delay", the scan
engine can continuously output the same barcode
that it reads.
Set "Output Time Delay" and also "Re-reading
timeout reset prohibited", the same barcode can be
decode and output only after the delay time period
is exceeded.
Set "Output Time Delay" and also"Enable reread
timeout reset", the output can be read only
after the delay time limit is exceeded and the
same barcode is not read. Set "Output Time
Delay" and set "Infinite", the same barcode
will not be output.
。