RHINO RM1900 Series, Manual

Page: 100 / 111

Barcode Scanner Manual
98
Appendix D: examples for setting.
Modify Reading Time Interval
Example: Set Reading Time Interval to 500ms.
Please read the following setting codes in: 1. Scan
'Enable Setting Code'(If it is already enabled, user
can skip this step). 2. Scan 'Customize'.
3. Scan Data Code '5','0', '0'.
4. Scan Data Code "Save".
5. Scan "Disable Setting Code". (If you want to continue
using, you can skip this step).
Modify Prefix or Suffix
Example: Set Prefix to ‘CODE’.
Please read the following setting codes in:
1.Look up the table to get the hexadecimal value of
‘CODE’ which is '43', '4P','44', '45'.
2.Scan "Enable Setting Code"(If it is already enabled,
user can skip this step). 3. Scan "Modify Prefix
Content".
4. Scan the data code '4', '3','4', 'P','4', '4','4',
'5'.
5. Scan "Save".
6. Scan "Disable Setting Code". (If you want to continue
using, you can skip this step).
Appendix D: examples for setting. Barcode
Scanner Manual