RHINO RM1900 Series, Manual

Page: 101 / 111

99
Modify End Character
Example: Set End Character to 0x0D.
Please read the following setting codes in:
1. Scan 'Enable Setting Code'(If it is already enabled,
user can skip this step). 2. Scan 'Modify End
Character'.
3. Scan Data Code '0', 'D'.
4. Scan Data Code "Save".
5. Scan "Disable Setting Code". (If you want to continue
using, you can skip this step).
Modify Code ID
Example: Set Code ID to ‘p’.
Please read the following setting codes in:
1. Look up the table to get the hexadecimal value of
‘p’ which is 70.
2. Scan "Enable Setting Code".
3. Scan "Modify PDF417 Code ID".
4. Scan the data code "7" and "0".
5. Scan "Save".
6. Scan "Disable Setting Code". (If you want to continue
using, you can skip this step).
Modify NGR Message
Example: Set NGR Message to ‘!ERR’.
Please read the following setting codes in:
1. Look up the table to get the hexadecimal value of
‘!ERR’ which is 21, 45, 52, 52.
2. Scan "Enable Setting Code".