RHINO RM1900 Series, Manual

Page: 102 / 111

100
3. Scan "Modify NGR Message".
4. Scan the data code ‘2’, ‘1’, ‘4’, ‘5’, ‘5’,
‘2’, ‘5’,
‘2’.
5. Scan "Save".
6. Scan "Disable Setting Code". (If you want to continue
using, you can skip this step).
Appendix D: examples for setting. Barcode
Scanner Manual
Modify Maximum Length Limit or
Minimum Length Limit
Note: The maximum length of any 1D barcode is limited
to 127. If the maximum length is less than the
minimum length, scan engine will only read these two
lengths barcodes. If the maximum length is equal to
the minimum length, only this length is supported.
Example: Set the scan engine to only read Code 128
barcodes with a minimum of 8 bytes and a
maximum of 12 bytes.
Please read the following setting codes in:
1. Scan 'Enable Setting Code'(If it is already enabled,
user can skip this step). 2. Scan 'Customize Minimum
Length Limit'.
3. Scan Data Code '8'.
4. Scan Data Code "Save".
5. Scan 'Customize Maximum Length Limit'.