RHINO AGM52, Operator'S Manual, Page: 89 / 186

INTRODUCTION
IN
T
R
O
D
U
C
T
IO
N
Your Disc mower is designed for light-duty cutting such as pasture mowing, weed and grass control. With a reasonable
amount of preventive maintenance, your Mower will provide years of dependable service
For Non-Agricultural use, OSHA, ASABE, SAE, and ANSI standards require the use of Chain
Guards, Deflectors, or Solid Skirts at all times. The Mower manufacturer strongly recommends
the use of Chain Guards or Rubber Deflectors for Agricultural purposes as well, to reduce the
risk of property damage, serious bodily injury, or even death from objects thrown out by or from
contact with the Cutting Blades
At least 20% or the tractor’s weight must be on the front tires with the Mower lifted to provide
adequate traction for safe steering under good conditions. Slow down on hills, rough terrain,
and curves
The front, rear, left, and right are determined by the normal direction of travel, the same as driving an automobile.
AGM 52-62-72-82 10/10 Introduction Section 2-3
© 2010 Alamo Group Inc.