RHINO AGM52, Operator'S Manual, Page: 13 / 186

SAFETY
In addition to the instructions described in the manual follow all general safety and accident prevention rules. Before
operating the machine or performing maintenance read and understand the instructions.
The labels affixed to the machine call attention to safety precautions that shall be followed.
Make sure that safety labels are legible. Clean and replace them if necessary.
Before maintenance, adjustment or cleaning, lower the machine to the ground,
turn off the engine of the tractor, disengage power takeoff, set hand brake and
remove the ignition key.
SA
F
ET
Y
Before operating the machine make sure that all guards and safety devices are properly secured and in good
conditions; replace damaged safety devices. In particular
check wear on guards, curtain and connecting devices
before operating the machine.
For your safety and the safety of others do not tamper with, damage or
remove safety devices.
While working make sure that no people or animals are within 50 m of the
machine. When working near public roads or public places keep others away
and be more careful.
Keep the manual handy to check operational running. If the manual becomes lost or damaged, order a copy from
RHINO.
The machine shall be operated exclusively by authorised trained staff.
The machine has been designed to be operated by one operator at a time.
There might be some dust production during operation. It is recommended to use tractors equipped with cabins with
filters on the fan system or to use suitable fan devices such as masks in order to protect the breathing system.
Before operating the machine check wear on cutting devices (knives and discs).
Replace worn or damaged knives
and discs
. After replacing make sure that all fasteners (bolts, screws and nuts) are of the type recommended by the
Manufacturer.
If an object is hit, damaged or worn knives are more likely to be thrown out of the machine. Replace them immediately.
After transport perform an inspection. If the machine has been damaged contact RHINO.
Make sure that there are not any foreign bodies in the machine (debris, tools, etc.) which could affect operation or
cause injuries to the operator.
If using compressed air or water for cleaning, wear safety glasses and masks and keep others away.
AGM 52-62-72-82 10/10 Safety Section 1-7
© 2010 Alamo Group Inc.