WATER DRAINAGE
1. Manual drain: (as shown in Figure 10)
a)
Once the unit shuts down upon full water, turn off the power of the unit and then
unplug the power plug.
Note: move the unit carefully to avoid spillage of water in the water tray at the bottom
of the unit.
b)
Position a collection vessel below the water outlet at the back of the unit.
c)
Screw off the drain cap, unplug the water plug and water will flow into the vessel
that holds water automatically.
Do not misplace the water plug and drain cap. Tilt the unit slightly backward when
draining. Once the water is fully drained, insert the water plug and screw on the water cap
tightly. Turn on the unit only after the water plug and drain cap are installed.
2. Continuous drain:
a)
Screw off the water cap in the direction shown by the arrow and unplug the water
plug; (Figure 11)
b)
Insert a OD 13mm PVC drain hose 8mm-10mm into the water outlet; (Figure 12)
c)
Connect the drain hose to a water drain.
Place the drain hose in a place at a height below the water outlet and keep the
drain hose free from kinks. When continuous drain is used, store the drain cap and water
plug safely.
Figure 10
Water outlet
Water plug
Drain cap
Figure 11
Figure 12
Drain cap
Water outlet
Water plug
Drain hose
Note
Note
