WARNING
RINSE AID
LEVEL
Rinse aid use
The machine has a standard rinse aid dispenser. The machine automatically dispenses the product.
The rinse-aid chemical, shall be suitable for professional glass and dishwashers. It is advisable to rely on specialized retailers
in the sector.
Should the detergent lack, the display will show
RINSE-AID LEVEL
(only with optional "Sensor for Chemicals Low Level").
A buzzer sounds at one minute intervals.
By pressing the key
Info E
the display goes back to machine ready status. The signal becomes scrolling in the display’s
lower part alternatively to the cycle name.
The signal remains until the detergent tank is refilled.
55°C
P
1
70°C
RINSE AID LEVEL
Drain pump system
The machine is standardly equipped with a drain pump. It regulates the tank water level during wash cycles. At the end of
the working day it drains the tank.
To proceed with a draining, both with machine ON and stand-by mode, press the key
C
until the display shows the message
TANK DRAINING
.
With the door closed, the key
Start F
is blue and flashes.
After the draining is complete, the machine will turn automatically in
STAND-BY
mode.
TANK DRAINING
55°C
P
1
70°C
GLASSES - SHORT
Extra cold rinse function (optional)
Should the machine be equipped with a
Extra cold rinse
(optional) feature, and it is enable, after the normal rinse cycle an
extra cold rinse is made for about 10 seconds with tap water.
To start the optional cycle, with machine ON, press the key
D
.
The display shows the relative symbol
.
The optional cycle is active until the key
D
is pressed again. At this moment the icon disappears.
8
