OPERATION
Machine start-up
• Check if the pump suction filter is properly inserted in its seat in the wash-tank bottom (see pict. 1).
This filter must be cleaned every 20 wash-cycles or whenever necessary.
DO NOT use the appliance without the filters.
• Put the surface filters in place (see pict. 1).
• Shut the machine door.
• Turn the water valve “open”.
• Turn the main power switch ON.
• The machine is on
STAND-BY
. In the
G
display are shown: the symbol
, the date and time
and a possible notice of operations to be carried out by the user.
The key
A
turns red. The key
C
turns blue. If the machine is provided with the Water Softener
optional also the key B turns blue.
• Press and hold the key
A
. The key
A
turns green.
• For the first 4 seconds the key
Start F
turns green and on the display
G
appears the last cycle carried out before switching
the machine o
ff
. During this time it is possible to pre-select the cycle to start washing.
Keep pressed the key
Start F
to scroll the available cycles' list, until the desired one appears. Release the key. This function
allows to save time in start-up phase if a cycle with lower operating temperatures is selected (i.e.: Rinse 70°C instead of
82°C). The key
Start F
turns red.
• If the tank was not drained after the previous use or if the tank water temperature is below 50°C, the machine proceeds
with a tank draining. In any case remember that if the machine is not used the tank must be drained (see
WARNINGS
).
Even if the tank is empty the draining pump runs for a few seconds to eliminate any water residual.
• The machine proceeds to tank filling and heating, by steps. The display
G
alternatively shows the messages
FILLING
WATER
and
HEATING
.
By pressing the key
Info E
it is possible to display the tank and boiler temperatures.
The machine is ready to wash when both tank and boiler are filled and the set temperatures are reached.
Start the wash cycle
• Insert the rack filled with objects to wash. The objects must be correctly placed in the rack.
• If the desired cycle hasn't been selected before, it is possible to do it in this moment by keeping press the key
Start F
.
The display will show in sequence all these available programs.
Once the wanted program is displayed, release the button.
Available programs:
pict. 1
Cycle
Code
Cycle name
Icon
Total time*
Note
Rack 40
Racl 50
*
*
*
*
M
O
T
S
U
C
0
P
Partial drain cycle with adjustable time and
temperatures
P1
GLASSES - SHORT
60"
60"
Partial drain cycle with rinse temperature at 70°C
P2
GLASSES - MEDIUM
120"
120"
Partial drain cycle with rinse temperature at 70°C
P3
GLASSES - INTENSIVE
180"
180"
Partial drain cycle with rinse temperature at 70°C
P4
BEER GLASSES
90"
90"
Partial drain cycle with rinse temperature at 82°C
C
°
2
8
t
a
e
r
u
t
a
r
e
p
m
e
t
e
s
n
ir
h
ti
w
e
l
c
y
c
n
i
a
r
d
l
a
it
r
a
P
"
0
8
1
"
0
2
1
S
G
U
M
R
E
E
B
5
P
P6
CLEAN STANDARD
120"
180"
Total drain cycle with rinse temperature at 82°C
C
°
2
8
t
a
e
r
u
t
a
r
e
p
m
e
t
e
s
n
ir
h
ti
w
e
l
c
y
c
n
i
a
r
d
l
a
t
o
T
"
0
6
3
"
0
7
1
G
N
O
L
N
A
E
L
C
7
P
*The indicated time is valid only if the machine has reached the boiler temperature set.
**The cycle
P0
is a customizable cycle according to the user’s needs, to be set by a technician during the machine installation.
5
