RHEINTACHO RT STROBE pocketLED LASER, Operating Instructions Manual, Page: 10 / 13

10
Operating instructions RT STROBE pocketLED LASER
7.2.5 Operation mode
The following operation modes may be displayed:

Note
When inactive, the backlight turns off automatically after
approx. 10 seconds.

Note
The stroboscope will be automatically switched off after
15 minutes.
7.3 Factory reset

Note
To reset the factory settings, press and hold the buttons Menu “M”
(B) and “MINUS” (D) simultaneously.
No.
Battery status
Battery status
LASER / EXT
LASER / EXT
Display Adjustable
parameters
Description
Battery fully charged.
Battery half charged.
The trigger frequency
is below the measurement
range.
The trigger frequency
is below the measurement
range.
No. Display Adjustable
parameters
Description
The trigger frequency is
3,000 flashes per minute,
determined by the reflective
laser beam. Das The laser
symbol flashes.
The trigger frequency
is below the
measurement range.
The trigger frequency
is above the
measurement range.