HEAT PUMP AND TANK ASSEMBLY
14
4.
Drain Hose:
Retrieve the drain hose, hose clamp, saddle and two black
screws from the kit bag.
Feed the hose through the penetration on the side of the heat pump
module
Slip the hose clamp over the upper end of the hose within the heat
pump module
Push the hose over the spigot on the condensate tray located below
the evaporator
Secure the hose to the spigot with the hose clamp
Extend the hose away from the base of the heat pump module using
standard 12 mm irrigation fittings
Secure the hose to the side of the heat pump module with the saddle,
using the two black screws.
Step 4
feed hose through
secure hose
secure hose
penetration
to the spigot
with saddle
