table of contents
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
12.
13.
14.
legend
introduction
technical data
configurations
presentation
preliminary actions
connections
first power on
programming
parameters
solution of problems
maintenance
how to do to…
hydraulic diagram
in the listed chapters, the manual describes a
XX micro
vending machine in its hardware and software components for a
complete and fully-aware use of all machine functions; due to the
large variety of available options and the constant technical update
of our vending machines, some special device or function might be
indicated and described not in the manner you expect; in this case,
do not hesitate to contact us;
telephone: 0039 02 966 551
fax: 0039 02 96 55 086
e mail: [email protected]
ATTENTION: this label applied next to the serial number label
inside the vending machine points out that the instructions
supplied by this manual must be carefully read before the
installation and operation of the vending machine;
please, print this manual only if necessary; environmental
protection is our common interest;
page 09
page 09
page 10
page 12
page 13
page 20
page 21
page 22
page 24
page 29
page 31
page 33
page 36
page 38
02
08.03.2017 general update;
01
30.10.2014 supplement EN60335 5th edition and declaration of conformity; A4
00
21.07.2011 First issue;
rel.
date
description
this document is made available electronically on site www.rheavendors.com
MAN1890105 rel. 02 dated 08.03.2017
page no. 8 of 38
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: [email protected]
rheavendors group's sole property
XX micro by
