Page 6 of 10
HARDWARE NEEDED FOR STEP #1:
STEP #1
LEG AND SIDE PANEL ASSEMBLY
PANEL AND RAIL FRAME ASSEMBLY
STEP #1.1
Gently lay the side panels on their backs on a flat and non
abrasive surface.
STEP #1.2
Align and insert the threaded rod of the leg into the holes and
turn clockwise to tighten. See
DETAIL A
.
STEP #1.3
Bring the side panels and the rail frame to an upright
position.
NOTE:
At both ends of the rail frame are holes for the bolt to pass
through that correspond to the hole on both ends of the side
panel with pre-installed insert nut .
STEP #1.4
Align the hole of the rail frame into the hole of the side panel
then insert the Allen head bolt into hole and turn clockwise to
tighten. Tighten the bolt with Allen wrench Provided. See
DETAIL B
.
NOTE:
DO NOT OVER TIGHTEN.
DETAIL A
DETAIL B
(AA) 1/4" X 1-3/4" BOLT = 4 PCS
ALLEN WRENCH = 1 PC
LOCK WASHER = 4 PCS
PLAIN WASHER = 4 PCS
