background image

Page  3

IMPORTANT SAFETY INFORMATION FOR CRIBS

CAUTION:

 ANY MATTRESS USED IN THIS CRIB MUST BE AT 

       LEAST 27-1/4 INCHES BY 51-5/8 INCHES WITH A 

       THICKNESS NOT EXCEEDING 6 INCHES.

WARNING

Do not use this crib if you cannot exactly follow the instructions

that come with it.

Do not use this crib for a child who can climb out of it or who is

taller than 90 cm.

Do not place any cord, strap or similar item in or near this crib

that could become wrapped around a child's neck.

Do not place this crib near a window or patio door where a child

could reach the cord of a blind or curtain and be strangled.

Check this crib regularly before using it, and do not use it if any

part is loose or missing or if there are any signs of damage. Do

not substitute parts. Contact the manufacturer if replacement

parts or additions instructions are needed.

Children can suffocate on soft bedding. Do not place pillows,

comforters or soft mattresses in this crib.

Use a mattress that is no thicker than 15 cm and is of such a size

that, when it is pushed firmly against any side of this crib, it does

not leave a gap of more than 3 cm between the mattress and any

part of any other side of the crib.

Summary of Contents for Landry Storage











Reviews: