Page 9
STEP #4
FRONT RAIL ASSEMBLY AND HIDE UNUSED HOLES
STEP 4.1:
Both ends of the front rail have holes for the bolt to pass through
that correspond to the holes on the posts for both side rail panels
with pre-installed nuts. Attach the front rail frame to the side rail
panels by using Allen bolts (CC) with lock washers and plain
washers. See
DETAIL G
.
After assembly, re-tighten all bolts for a snug fit. DO NOT OVER
TIGHTEN.
STEP 4.2:
Return the drawers to the storage.
STEP 4.3:
When the mattress support is on the middle or lowest setting,
unused holes can hurt your child's fingers. Please use Allen bolts
provided to hide these holes. See illustration in
DETAIL H
.
HARDWARE NEEDED FOR STEP #4:
(CC) 1/4" x 1-3/4 " BOLT = 4 pcs
Lock Washers 1/4" = 4 pcs
Plain Washers 1/4" = 4 pcs
Allen Wrench = 1 pc
(DD) 1/4" x 1/2" BOLT = 8 pcs
G
H
(CC)
DETAIL G
(DD)
DETAIL H
