B
C
STEP 3
MATTRESS SUPPORT HEIGHT ADJUSTMENT
NOTE:
If mattress supports is not in the lowest position.
STEP 3.1
Loosen and remove all hardware (BB) on both sides of the frame of
mattress support.
STEP 3.2
Re-install the bolt on the third hole of the frame through the hole on the
arm support. Fasten the bolt with plain washers, lock washers &
hexagonal nut. Repeat procedure on the other arms of the mattress
support. See
DETAIL D & DETAIL E
.
DETAIL E
Mattress Support
Stabilizer Rail
HARDWARE
Lock
Washer
Hex Nut
Plain
Washer
Allen Bolt
(BB)
Allen Wrench
DETAIL D
(BB) 1/4" x 1 1/4" Allen Bolt = 8 pcs
Allen Wrench = 1 pc
Lock Washer = 8 pcs
Plain Washer = 8 pcs
Hex Nut = 8 pcs
11 X 70
Open Wrench = 1 pc
Allen Bolt
(BB)
Allen Bolt
(BB)
Allen Bolt
(BB)
6/7
Summary of Contents for JAMESON
Page 1: ...1 1 1 7 ...