Tiga User Manual
UM-Tiga-017-US
Tiga User Manual |
15
Procedure 9
WARNING:
DO NOT attempt to lift the wheelchair by any
removable (detachable) parts i.e. Height adjustable
push handles, Fold-down push handles and Screw-
in push handles
Button Release
Flip-Down push handles
Screw-In push handles
Height Adjustable push handles
Procedure 9 - Push Handles
A range of push handles can be supplied on this wheelchair
for use by an attendant and operated as per the following
procedures.
9.1: Adjusting Height adjustable push handles
Release the over centre lever and position at the desired height
and then tighten the lever to secure. Repeat on the other side
to get uniform height between both handles.
9.3: Operating flip down push handles
Press the button underneath the handle and push the handle
down at the same time, repeat on other side. Pull up the
handle until it clicks into position to return to original position.
9.2: Screw in push handles
Screw in push handles can be removed by unscrewing
them from the back rest. To install, screw them in until
tight by hand.
