15
3.9
MOVING LIFT TO OPERATING POSITION
1.
The following precautions must be observed when moving your lift for any reason:
a.
Be sure of your footing.
b.
Bend your knees and lift with your legs.
c.
Hold the lift section close to your body when lifting.
2.
After moving your lift to the operating position, ensure that the frame is square and that the lift sets level. Refer to
Section 3.4, Step 7.
CAUTION:
SEVERE OUT OF LEVEL INSTALLATION MAY CAUSE BINDING, RESULTING IN
EQUIPMENT DAMAGE.
CAUTION:
FRAME MUST BE SQUARE TO PREVENT DAMAGE AND/OR IMPROPER FITTING OF
CANOPY FABRIC IF SO EQUIPPED.
3.
Verify frame is square by measuring the diagonal distance from the outside of frame corner to opposite corner. Repeat
for alternate corners. The
difference between the two measurements shall not exceed 1/4 of an inch
.
Frame Diagonal Measurement Diagram
(Measure to Outside Corners)
