12
3.6
HANDWHEEL AND WINCH ASSEMBLY
1.
Refer to Figure 3-7.
Attach winch assembly (8) to vertical leg “A” using backer plate (7), the two-hole plate (25) and
the hardware shown. Attach the winch guide sheave assembly (26) to the leg as shown.
Note;
If an optional canopy is to be installed, one canopy extension leg should be installed at this time, as the winch
mounting holes are also used to mount the optional canopy extension leg.
2.
Attach the handwheel (9) to the winch handwheel adapter plate.
3.
Attach the spinner knob assembly (11) to the handwheel using the supplied hardware. Select the hole that is most
comfortable for
lowering
the lift.
CAUTION:
DO NOT USE THE SPINNER KNOB FOR LIFTING THE BOAT. THIS CAN CAUSE
EQUIPMENT DAMAGE.
Figure 3-7.
Handwheel Mounting
