3.4
CYLINDER SUPPORT INSTALLATION
1.
Refer to Figure 3-2.
Install the left (6) and right (7) cylinder support plates onto the right hand main frame (5). Install
cylinder support plates so that the welded bosses on the support plates are facing each other.
2.
Secure the cylinder support plates with hardware E, F, G, H, & I. Use fastener (E) in the 3” wide frame tube. Use fastener
(I) in the 2” wide tube frame. Install bolts so that the nuts are on the outside of frame.
3.
Repeat steps 1 and 2 above to assemble left hand main frame (4).
Figure 3-2.
Main Frame and Cylinder Support Assembly
7
