RGBlink RGB-RD-UM-4K, User Manual

Page: 12 / 51

4K Ultra HD NDI CAMERA User Manual
11
Chapter 2 Install Your Product
2
.1 Power-on Initial Configuration
1) Power-on: Connect DC12V power supply adapter with power supply socket
2) Initial Configuration: The remote control receiving indicator flashes after power on, the pan-tilt turns left to the
lowest left to the lowest, and then turns to the HOME position (both the horizontal and vertical positions are in the
middle), while the movement first shrinks and then stretches. When remote control receiving indicator stops flashing,
the self-checking is completed.
Notes:
1. After power on and self-checking, the camera will automatically return to the preset 0 position if it’spre-set.
2. The default address for the IR remote control is 1#. If the menu restored to factory defaults, the remote
control default address will restore to 1#.
2.2 Video Output
1) Network output
A. Network cable connection: as shown in Figure 1.1 label 7
B. Webpage Login: open your browser and enter 192.168.5.163 (factory default) in the address bar; press Enter to
enter into the login page, click on the “player is not installed, please download and install !" and follow the
installation steps for installation. Then enter the user name
admin and password admin (factory default); press Enter
to enter into the preview page, users can carry out PTZ control, video recording, playback, configuration and other
operations.
2) HDMI Video Output
A. HDMI video cable connection: as shown in Figure1.1 label 14
B. Connect the camera and the monitor via HDMI video cable, and the video output is available after the camera
self-test.
3) USB3.0 Video Output
A. USB 3.0 video cable connection: as shown in Figure1.1 label 13
B. Connect the camera and the computer via USB3.0 video cable, open the video software and select the image
device to output the video.
If the recording and broadcasting host supports LAN network control port, the concentrator can be replaced by LAN
network switch.