Testing and Care
Page 18 of 28
Wander Management Transmitters User Guide
0510-1122-J
4. While holding the button in, the indicator
light flashes and a tone sounds once
per second.
5. Wait for at least 3 flashes of the
indicator light and 3 tones from the
transmitter tester to verify that the
transmitter is functioning correctly.
6. If the transmitter fails this test, check the
battery in the tester (the transmitter
tester requires a 9V battery).
7. Retest the transmitter. If it fails a second
time, DO NOT USE THE
TRANSMITTER and contact RF
Technologies Technical Support .
Signal
Strength
1. Physically enter an Exit Zone with the
transmitter and walk through the door.
2. An alarm must occur when the
transmitter is within 4-feet of the
monitored door. If applicable, the door
should also lock.
3. If an alarm does not occur, DO NOT
USE THE TRANSMITTER and contact
RF Technologies Technical Support.
Weekly
Testing
The following testing is required for all
transmitters in use on residents.
1. Test the operation of transmitters using
the transmitter tester.
NOTE
: Never take a resident to a door
to test their transmitter.
2. Visually inspect transmitters for damage
or loose parts.
3. Verify that the warranty expiration date
stamped on the transmitter has not
Summary of Contents for Code Alert Wander Management
Page 1: ...Wander Management Transmitters User Guide ...
Page 31: ......
