Page 43 of 55
System Tools > System Log
This page allows you to configure the Router to dump its status to a System Log Server.
Enable Remote System Log: Enable this feature to allow the Router to constantly update its
status on a System log Server.
System Log Server IP: Enter the IP Address of the System Log Server if you had enabled
Remote Logging.
System Log Server Port: Enter the port number the System Log Server is using.
Enable Local System Log: Enable this feature if you do not have a System log Server. The
events would then be logged locally on the Router.
Log Management when log is full (Stop Logging): When this option is chosen, the Router will
stop logging.
Log Management when log is full (Auto Delete): The maximum number of local log entry is
200. When all the 200 entries are used up, the Router will overwrite previous entries with new
logs.
Remember to Apply and Reboot for the settings to take effect.
System Tools > System Admin
This page allows you to change the Administrator’s Username and Password. The default
username and password is admin / admin. After every Factory Reset, the Router reverts to this
combination.
