RFNet APRT-2801 User Manual Download Page 39 | Manualshive

Page: 39 / 55

background image

Page 39 of 55

Firewall > MAC Filter

This page allows you to specify which computer can access the Internet and which computer
cannot access the Internet. The specified MAC address and the policy for the computer is
reflected in the table.

Enable Ethernet MAC Control: Tick to enable Ethernet MAC Control.
Default Policy: This policy determines whether computers, whose MAC addresses are not in the
table,  are  able  to  access  the  Internet.  If  you  choose  Deny  All,  all  computer  connected  to  the
Router will not be able to access the Internet other than those specified in the table.
MAC  Address:  Enter  the  MAC  address  of  the  computer.  The  format  for  the  MAC  address  is
aa:bb:cc:dd:ee:ff.

Policy: Choose to deny or allow the computer to access the computer. Click on the Add
button to add the policy.

Firewall > IP Filter

This page allows you to filter off certain IP addresses at certain time of the day.

«
...
37
38
39
40
41
...
»

Summary of Contents for APRT-2801
























































Reviews:

No comments

Related manuals for APRT-2801

Brand: D-Link Pages: 3

Brand: D-Link Pages: 12

Brand: Karma Pages: 12

Brand: Zenitel Pages: 29

Brand: Super Circuits Pages: 4

Brand: LINOVISION Pages: 17

RangeMax WNR3500

Brand: NETGEAR Pages: 2

Brand: Loopcomm Pages: 40

Brand: Motorola Pages: 36

AP-6521-60010-US

Brand: Motorola Pages: 56

Brand: Motorola Pages: 46

Brand: Motorola Pages: 40

Brand: Motorola Pages: 724

Brand: Motorola Pages: 44

Brand: Motorola Pages: 44

Brand: Motorola Pages: 1

Brand: Air Live Pages: 3

Brand: Air Live Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands