The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
Page: 16(
21)
When connected the unit prompts you to enter a username and a password:
login as: root
password:
================================================================================
+ Welcome RFI Engineering RFIos (Rose)...
+ Version : G-router (buildnr:0235)
+ Build on : 01/28/2008 15:51:05
================================================================================
root@G-router-00804855565C:~$
The default password for the unit is set to:
rfi123
At the shell prompt use the command
exit
to log out. This returns you to the logging function
and returns you to the WAN router prompt.
As an example,
root@G-router-00804855565C:~$ exit
Router>
to logout.
4.6 Disconnect the GSM dial-in connection
You can disconnect the dial-in connection by giving the escape sequence: “
<CTRL>\
“ followed by
“
.
” (dot). As an example:
Router>
Going to hangup now, Good Bye
NO CARRIER
