EZTEXT
DS-EZTEXT-6
Output Commands
Title
Command
Description
Example
Activate an
output
OUT
Turns an output ON or OFF
UNITPW#OUTn#x
n=Relay number = 1 to 4
x=Relay Status = ON, OFF
1234#OUT1#ON
Turns Output1 ON
Set an out-
put name
OPNAME
OPNAME?
This designates a name to an EZTEXT output
UNITPW#OPNAMEn#name
n=Output no
name= name can be up to 15 characters.
UNITPW#OPNAME?
Requests the name of the Outputs
1234#OPNAME1#AIRC
ON
sets output 1 name to
be ‘AIRCON’
1234#OPNAME?
Requests names of all
the outputs
Set output
on time
OPDLY
OPDLY?
Sets output operation time. The output can be set
from 1 to 65500 seconds, or If is set to ‘0’, then the
output will latch on
UNITPW#OPDLYn#t
n=Output number
t=Delay time (seconds)
UNITPW#OPDLY?
Requests the current ‘on’ time setting for an output
EZTEXT replies with the preset time delay output and
the actual time that the output has been activated for
Note the Timer counts down from the preset time de-
lay
1234#OPDLY1#500
Sets output1 to
operate for 500 sec’s
1234#OPDLY?
Responds with ;
OUTPUT1= 500/34
(output1 has been ac-
tive for 34 out of a total
500sec preset time)
Power Fail Commands
Title
Command
Description
Example
Number to
text on pow-
er failure
PFNUM
PFNUM?
PFNUMDEL
This command sets a number to text (max 5 nos) when
Power Failed (only if optional battery fitted) and when
Power is restored
UNITPW#PFNUM#<numbertotext>
Sets the number to text on power fail
UNITPW#PFNUM?
Requests the current numbers that are stored
UNITPW#PFNUMDEL
PFNUMDEL Deletes all stored Power Failed cell Nos
1234#PFNUM#004412
73898000
1234 #PFNUM?
Response: Returns
current settings
1234 #PFNUMDEL
Deletes all stored
cell Nos against this
Text when power is lost
Text when power restored
UNIT ID
POWER FAILURE RUNNING ON BATTERY
UNIT ID
POWER RESTORED
