24
Chapter 3
Software
(Connect Tab--Cont.)
Ethernet (Local IP 10.10.10.65): Connects to an Ethernet reader at the given IP address and open
a TCP/IP on the given port.
The first, second, third, and fourth byte of the TCP/IP address need to
be entered for the interface to connect to the reader. The IP port number will also be required.
Port Option: Allows for changing the port location. Xport port location needs to match this
number
Note:
Ports below 1024 are for system use only.
Find Next IP Button: Looks for other readers on the same ethernet connection.
Device List Pull-down: Lists the devices that the utility is actively connected to.
For Example, if you have an RJ45 connector (as seen below) then the specific logical protocol
connection to be selected is Ethernet.
Note:
Remember, not all USB interface connections do not necessarily logically connect through
USB. If your device has a USB connector, and your device part number suffix is xx0 or xxF, the
logical protocol connection is made through COM. A device with a USB interface connector and a
part number suffix of xxU will connect through the USB connect option.
CONNECTORS
Summary of Contents for pcProx Plus
Page 1: ...99009010 Rev U pcProx Plus pcProx Enroll Wiegand Converter Configuration Utility User Manual...
Page 6: ...ID Card Reader System Output Formats 6 Chapter 1 The Basics...
Page 10: ...10 Chapter 2 Hardware Interface Connectors OUTPUT CONNECTORS T...
Page 34: ...34 Chapter 3 Software GetQueuedID Data Display HH MM SS displays 00 00 06...