1x3-6' Door
Trim
3.
Install soffit panels on the
opposite side. Start with a
24" long panel that has a
'LAP' edge.
Step 18 Install Eave Soffit
4.
Cut 75-3/4' x 1x4 trim
boards to length and
install at the corners.
Soffit
Beveled Edge
Step 19 Install Front Door Trim
1.
Locate door trim packed with the single door. Install (2) two 1x3x72" boards along each side
of the door opening, flush with the bottom edge of the siding. Use 8d galv. nails.
2.
Install a 38-1/2" long 1x2 trim board
across the top of the door trim.
3.
Lay the door with the trim facing up.
4.
Install 5" hinges to one side of the door
frame. To position the hinge properly,
hold the rectangular plate against the
frame. Use 1-3/4" black screws.
5.
Position door in opening. Install
hinges to trim with 1-3/4" black
hinge screws.
6.
Install door latch.
1.
Locate a 5" wide x 24" siding panel that has a 'tongue' edge. Install this panel under the truss
overhang at the rear of the building. Install the siding/soffit panel with the beveled edge flush
with the end of the trusses and the cut edge against the gable siding. Use 6d galv. nails.
2.
Install more full length siding panel under the trusses. Cut the last panel to fit.
