II&E2020_11
Hi-Finity electric lock: Installation and testing
– Manual for the installer & electrician 3
1
Safety information
It is very important to have the Reynaers Hi-Finity Training before You start to
order, construct or install. In this way, You are certified.
!
The installation, connection and commissioning of electrical equipment must be carried
out by a qualified electrician.
!
The system contains approved parts and they should not be replaced just like that. The
whole has been tested for optimal, high performance and guaranteed operation of the
applications described.
!
Reynaers offers a full range of components (supply boxes, cables, switching parts) to
enable safe electrical installation. All components have class II insulation for electrical
components.
symbol for Class II insulation
!
Unplug the electrical cabinet from the wall outlet or switch-off the circuit breaker before
making any connections.
!
Disconnect the batteries in the cabinet before making adjustments to the DC voltage.
!
If you have any doubts about the operation or execution, please contact your service
representative.
!
Additional information about handling instructions, installation and environment are
available on our website
2 Description of the Hi-Finity electric lock
The electric lock is a comfort and safe solution for locking a Hi-Finity sliding element. The
lock can be controlled by a push button or via a local home automation system. The lock
provides feedback for an alarm and/or ventilation system.
2.1 Parts list
System Catalogue
Hi-Finity: HFP
089.D25-.--
Chapter B + E + F
If you or the qualified electrician provide your own power supply, the power
supply cable must be connected to a 24 V DC regulated power supply with a
class II insulation, protected by a suitable residual current device (RCD).
However, it is not advisable to integrate the power source into the profile. Wall
mounting or fixing with a DIN rail is preferred.
