II&E2020_11
Hi-Finity electric lock: Installation and testing
– Manual for the installer & electrician 11
3.1.2 Electric lock upgrade ready
!
The top profile millings (see catalogue) are >1meter from the edge of the Hi-Finity
moving glass pane.
▲
1
Check the millings
Milling for lock
Milling for slide motor
Milling for return pulley
Position of all millings as if for
motorised
▲
2
Make all electrical connections
Insert the R-Switch box
061.8478.--
The cables ((Power-, pushbutton- and alarmfeedback cable) or 6-wire cable) enter the
profile at the position of the motor
Use the extension cable for the powercable
062.8681.--
and one for the pushbutton
062.8682.--
to extend to the position of the lock
The lock cable(no functionality during preparation period) and alarm feedback extension
cable are already installed.
Positioning from the position of the motor to the position of the lock, through the correct
chamber of the profile
Connect all wires to the R-Switch box
062.8681.--
+
062.8682.--
are the only cables that can be placed in the cavity
where the future belt will be placed
▲
3
Install the lock and lock bracket
▲
4
Install finishing caps for motor and return millings need to be made already!!
