II&E2020_11
Hi-Finity electric lock: Installation and testing
– Manual for the installer & electrician 4
2.1.1 Choosing the right assembly
The electric lock can be assembled as standard electric lock or
pre-assembled for an easy
upgrade to a motorised Hi-Finity solution later-on.
!
Both solutions use the same electric lock but different wires, millings and adapters in
the system and connection to the vent. The wiring to the button and power can be re-
used. No additional construction work needs to be done for the upgrade to a motorised
solution.
Guidelines and decision matrices to help you select the right articles, quantities and
millings can be found in the above-mentioned catalogue.
2.1.2 Assembly accessories for electric lock
!
These items must be ordered individually and are not available in 1 set!
For a complete parts list of the element: see catalogue per possible configuration.
Mechanical parts
ELECTRIC LOCK FOR SLIDE MOTOR OR MANUAL Hi-Finity
(
062.8262.--)
MOTOR LOCK COVER PLATE
(062.8249.XX)
Or
RETROFIT MOTOR LOCK COVER PLATE
(062.8203.--)
For conversion 062.8228 or 062.8229 locks to 062.8262.--
CONNECTING ROD
(062.9551.--)
CONNECTING ROD - VENTILATION (150mm)
(062.9550.C35)
