12/17
Bosch Rexroth Canada ı August.2018 ı Revision 2.0
This is a very useful feature. In operation mode operators can use the knobs to adjust
application rates for both primary and tow spreaders by press the
‘Lock’
symbol to enter
into
‘Sync’
mode
(‘
sync
’ on the lock symbol) when both rate positions are the same and the
ground speed is >0. Pressing the symbol again would turn the
‘Sync’
mode off. (Note: Key
needs to be removed)
Press the
‘Lock’
symbol to enter into programming mode. (Note: A valid
‘PROGRAMMING
KEY’ must be inserted into the USB port.)
See Calibration Manual for programming details.
