11/17
Bosch Rexroth Canada ı August.2018 ı Revision 2.0
With a
‘PROGRAMMING KEY’ inserted
Press the
‘USB’
symbol to transfer the log data and the parameter. “Transfer Successful”
will appear on the screen momentarily when it finishes.
Without a key inserted
Press the
‘USB’
symbol to clear trip summary.
Note:
‘PROGRAMMING KEY’ is for programming and data log. ‘DATA LOG KEY’ is for log
data only.
4.4 Brightness and Volume Adjustment
Press the
‘Bright/Vol’
symbol to enter into adjustment mode, volume or bright. Press again
to toggle the other mode.
If ‘AutoDimr’ is checked in setup the brightness automatically
change. Use the up and down arrows to adjust (only adjustable with vehicle stationary).
T
o adjust volume, the “Vol
Adj” needs to be checked on
setup user screen.
4.5 Manual Hydraulic Gate Adjustment
For hydraulic gate operation ONLY.
Press the
‘Cylinder’
symbol to select the gate adjustment mode. Use the up and down
arrows to adjust.
Press the
‘Cylinder’
symbol
again to end the gate
adjustment.
4.6 Sync
/Programming Mode
