REXON PJ2-COM RADIO, Operator'S Manual

Page: 8 / 28

8
Precautions:
• Changes or modifications not expressly approved by the
manufacturer for compliance could void the user’s authority to
operate the equipment.
• Never attempt to service this unit yourself. It should be referred
to qualified service personnel. Please read the Warranty section in
this manual.
• If liquid spills or some solid object falls into the unit, remove the
battery pack or external power adapter and have the unit checked by
a qualified person before further operation.
• Never dispose of batteries or battery packs in a fire. They
may explode.
• Never leave weak or dead batteries in the Alkaline Battery Pack. They
may leak and cause permanent damage.
• Never store a battery pack where it may be accidentally shorted.
• Use only the approved external power adapters and battery packs.
• Never touch an external antenna when the danger of lightning
is present.
• Do not leave the transceiver near heat sources, such as radiators or
air ducts, or place the transceiver in an environment where the
radio will be subjected to moisture, excessive dust, shock or
mechanical vibration.
• Abrasive cleaners or chemical solvents may mar or damage the
case. Clean the transceiver with a soft cloth dampened with a mild
detergent solution.
• If operating the transceiver at temperatures outside the range of
-20°F to 122°F (-30°C to 50°C), the LCD (screen) may not display
the selected frequency. If the PJ2 COM is used in temperatures
lower than the recommended range, the characters being displayed
may change very slowly. These irregularities will disappear, with
no harm to the PJ2 COM, when operation is resumed within the
recommended temperature range.