REXON PJ2-COM RADIO, Operator'S Manual

Page: 10 / 28

Controls
This section serves only to identify and briefly describe the PJ2 COM’s
external features. Please see the Operating Instructions section for detailed
instructions on the use of the PJ2 COM.
Top View
(A) Antenna Connector
The flexible rubber antenna or an external antenna may be attached
to this BNC connector.
(B) Earphone Jack
A standard headphone PJ plug will fit into here. The internal speaker
is disabled when this jack is used.
(C) Microphone Jack
A standard headphone PJ plug will fit into here. The internal
microphone is disabled when this jack is used.
(D) Squelch
Rotate clockwise to increase squelch and counterclockwise to
decrease squelch.
(E) On/Off and Volume Control
Combination on/off and volume control. Turn the knob clockwise
from the OFF position to turn the unit on and to increase volume.
Turn the knob counterclockwise to decrease volume and to turn the
unit off.
(F) Wrist Strap Attachment point
A wrist strap can attach to this location.
Left Side View
(G) Light Button
This button activates the back lighting for the screen and keypad.
This key is also used in combination with the Clear Key to enable/
disable the auto-light feature.
(H) Push-To-Talk Button
This button activates the internal microphone or an external
microphone when using the optional headset adapter.
(I) Flip/Flop Button
This switch is used to flip flop between your current and last frequency.
Right Side View
(J) External USB-C Power Port
The PJ2 COM may be powered externally, with or without a battery
pack attached by plugging a 100 - 220 Volt Wall Power Adapter into
this location. Note that the PJ2 COM needs 2.4 amps to operate
properly. Wall adapters providing less amps should not be used. Use
the wall plug that was included in the box.
10