Rexing V1P Pro, User Manual

Page: 15 / 21

29 28
Exposure
Default setting: +0.0
Manually adjust the camera’s
exposure value to brighten or
darken recordings. Positive
values brighten recordings
while negative values darken
them.
Record Audio
Default setting: On
Allows you to enable or disable
audio recording with your
videos.
You may choose to record
audio with video or turn off
the microphone so all recorded
videos will be muted.
Note: You can also use the MIC
button to toggle auto recording.
Date Stamp
Default setting: On
Stamp the date and time to the
bottom of your videos. Note
that the date and time stamp
cannot be removed from videos
if this feature was enabled at
the time of recording.
Gravity Sensing
Default setting: Low
If a change in gravitational forces is detected, such as in
the event of a vehicular accident, the G -sensor will signal
to the camera, and an automatic file lock will be placed on the
current video, preserving your most crucial footage. Locked
videos can be found on the memory card under “\CARDV
\MOVIE\RO”.
Note: Locked video f iles won’t be erased by Loop Recording,
they will remain on the memory card until they are manually
deleted or when the card is formatted.
Plate Number
Default setting: Off
Enter your vehicle plate number. The plate number will be
displayed at the bottom of your videos.
To enter your license plate number:
• REC / MIC – Change current value
• OK – Move to next value
• MENU – Confirm setting