Notice
1
Menu Setup Operation: The menu is to be set up in non-video mode. If the
device is in video mode, proceed after
stopping
the video recording.
Memory card: A new card must be formatted to the device before use.
Continuous image recording for long periods of time may produce protected
files that are not subject to long-term protection (these files may not be
overwritten during loop recording) and storage fragments, which need to be
cleared regularly in order to save stable storage space.
Standard Voltage for On-board Charger: Standard input voltage is configured
at 12V. If a charge voltage greater than 12V is found, contact your dealer or
our service center to replace it with an applicable charger. An OEM charger
must be used.
Parking Monitor: Do not enable this function during driving. When it is enabled,
repeated start/stop recording may affect the integrity of your video.
Do not install the device within the range that could be impacted by airbag or
in a location that interferes with the driver’s view or other safe operation of the
vehicle. Make sure it is securely mounted.
The features described in the operation manual are available for all products
of the same type. Your model may have come with optional or additional
functions. Menu operations may vary. Please refer to the instructions that
apply to your actual product.
2.
3.
4.
5.
6.
1.