Install the blower and capacitor in locations that meet the following conditions.
Indoors (the product is designed and manufactured to be mounted in a machine)
0
0
Ambient temperature -10C ~ +50C
Ambient humidity 0 ~ 85 % (Non-condensing)
No explosive, flammable, and / or corrosive gas.
No exposure to direct sunlight.
No splashing of water or exposure to dust or debris.
No oil or grease, organic solvents, acid or alkaline chemicals.
No continuous vibration or excessive shock.
4. Installation
Wiring Diagram
TM
Contact Us @ +91 7769827676, 9637419123, +91 20 24699118, 65237108, 64700160.
TM
www.fhpgearedmotors.com
Red
White
Black
Black
Short Black wires and connect the capacitor
Wiring diagram for Single Phase Blower
Red-2
Black-2
Red-1
Black-1
~
Ensure that the impeller is rotation in
anti clockwise direction,
air flow is maximum.
as shown.
To change the direction, connect the supply
wire from White to Red.
Red wires are for running winding and
Black wires for Starting winding.
To change the direction, interchange
Black wires or Red wires.
Wiring diagram for Three Phase Motors
Standard Single Phase Blower
SR Type Single Phase Blower
~
Star Connection
Delta Connection
U
Brown
V
Red
W
Yellow
Black
Blue
White
Blue
Red
U
White
Brown
V
Yellow
Black
W
For the Voltage 415 VAC, 3-Phase Supply, Wires
are connected as shown in the fig.
Short Blue, Black and White and then insulate it
carefully.
To change the direction, interchange any two wires
between U, V & W.
For the Voltage 230 VAC, 3-Phase Supply, Wires
are connected as shown in the fig.
Short Blue & Red, Black & Yellow, and White& Red
as per the fig. Shown.
To change the direction, interchange any two wires
between U, V & W.
