background image

REVO S 

2PH from 60A to 210A

 

User’s manual

7

Maintenance

In order to have a corrected cooling, the user must clean the heat-sink and the protective grill of the fans. The 
frequency of this servicing depends on environmental pollution.
Also check periodically if the screw for the power cables and safety earth are tightened correctly
(See Connection Diagram)

Warranty condition

Producer gives a 12 months warranty to its products.

The warranty is limited to repairing and parts substitution in our factory and does 
exclude products not properly used and fuses.

Warranty does not include products with serial numbers deleted. The faulty 
product should be shipped to Producer at customer’s cost and our Service will 
evaluate if product is under warranty terms.

Substituted parts remain of Producer property.

           Return Material Authorization (RMA)

Customers wishing to return any items, whether they are incorrectly supplied, faulty or damaged in transit, 

must first complete a Return Material Authorisation (RMA) form to obtain an RMA number from the Service 

Department.
A full repair service is available for customers. Prior to submitting the RMA form and returning products, 
customers are recommended to contact the technical support team to determine whether the issue can be 
resolved with telephone support.

How the RMA service works

The RMA form and details are available on our web sites:

https://www.cdautomation.com/returns-material-authorisation/

When completing the RMA form, please be as specific as possible about the problem, including any pertinent 

application details. The more information given, the more quickly and more thoroughly the problem can be 
solved. The minimum information required is:

1. The Full Model Number

2. Quantity of units being returned

3. The units Serial Number(s)

4. A description of the problem (“faulty” or “unknown” is not sufficient)

Summary of Contents for S2PH


































Reviews: